Traditional sliding sash windows can become difficult to use over time, with common problems including snapped cords, sticking sashes, loose joints, draughts and timber decay. Windows that once moved freely may begin to jam in the frame, rattle in windy weather or no longer close properly.
We carry out affordable sash window repairs throughout East Kent, helping homeowners restore existing timber windows wherever possible. This can include easing seized sashes, fitting new cords, repairing damaged glazing bars, renewing worn beads and correcting smaller faults that affect the operation of the window.
Rather than recommending a complete replacement as the first option, we assess which parts of the sash window genuinely need attention. Retaining and repairing original windows can often be more cost-effective while preserving the character and proportions of the property
.avif)
The lower parts of a sash window are often the first areas to suffer from rot, particularly bottom rails and lower stile sections. Rainwater can sit against failed paintwork, damaged putty or exposed end grain, allowing moisture to enter the timber and gradually break it down.
We carry out sash rail replacements where the damaged timber cannot be reliably repaired. This can include fitting new bottom rails, meeting rails, top rails and localised stile sections, made to suit the size, profile and mouldings of the original sash.
Where only part of the sash is affected, we aim to retain as much sound timber as possible and replace only the decayed section. If a sash is too deteriorated for a sectional repair, we can also make and fit a complete replacement sash while retaining the existing box frame where suitable
Traditional timber casement windows can suffer from many of the same issues as sash windows, including rot, swollen timber, loose glazing, failed hinges and poor closing lines. Opening lights may become difficult to shut, catch against the frame or allow draughts and rainwater through gaps around the edges.
We repair side-hung, top-hung and fixed timber casement windows, dealing with localised decay and worn components before they develop into more extensive problems. Repairs can include replacing damaged lower rails, repairing corners, renewing hinges, adjusting catches and easing opening sections that have become stiff.
Where the frame remains in good condition, repairing the existing casement can be a more practical and affordable option than replacing the entire window. New timber sections can be made to blend into the original window, leaving it ready for preparation and decoration.
.avif)
.avif)
Timber window frames are exposed to the weather all year round, especially around the lower corners, outer linings, jambs and areas beneath the sashes. Once paintwork, sealant or putty begins to fail, moisture can enter the timber and cause rot to spread further into the frame.
We carry out practical frame repairs using either carefully fitted timber splices or resin repairs, depending on the condition and location of the damaged area. Rotten timber is removed back to a sound section before the repair is built up or new timber is fitted.
Our approach is to retain as much of the existing frame as possible while ensuring the repair is solid, weather-resistant and suitable for long-term use. This often avoids the cost and disruption of removing the entire box frame or replacing a complete window unnecessarily.
Window sills take the full impact of rainwater and are one of the most common areas for timber decay. When the slope of the sill is poor, the drip detail has failed or paintwork has broken down, water can sit against the timber and eventually spread into the frame below the window.
We repair rotten window sills, damaged sill ends, worn front edges and localised sections beneath sash and casement windows. Where a repair is suitable, only the affected timber is removed and replaced, allowing the rest of the original sill to remain in place.
For sills that are too damaged to repair properly, we can manufacture and fit replacement hardwood timber sills to suit the existing window. New sills can be shaped to include the correct fall and drip detail, helping rainwater run away from the building and reducing the chance of further damage.
.avif)
.avif)
Older timber windows often allow cold air and moisture through gaps around the sashes, loose putty, worn beads and poorly fitting opening sections. Even where the timber is largely sound, small faults can make a window feel draughty, noisy or difficult to use.
We carry out general sash and casement window maintenance including re- glazing, replacing loose or failed putty, renewing worn timber beads, draught proofing, fitting new ironmongery and improving the fit of moving sections. These smaller repairs can make a noticeable difference to comfort, security and day-to-day use.
Many sash window, casement window, frame and sill repairs can be assessed from photographs before arranging a visit. We cover Ramsgate, Broadstairs, Margate, Canterbury, Whitstable, Herne Bay, Sandwich, Dover, Folkestone and surrounding areas across East Kent.
From broken sash cords and rotten bottom rails to damaged casements, decayed frames and failed window sills, East Kent Repairs provides practical timber window repairs designed to keep existing windows working for longer. We focus on repairing the sections that need attention rather than automatically recommending a full replacement, helping to keep costs sensible while retaining the appearance and character of traditional timber windows.
Our skilled local carpenters carry out sash window repairs, replacement rails, timber splices, sill repairs, re-glazing and general maintenance for homes across East Kent. Whether your window is difficult to open, letting in draughts, showing signs of rot or simply in need of careful repair, we can assess the work and advise on the most suitable solution.
Many smaller window repairs can be priced from clear photographs, making it easier to get an idea of cost before arranging a visit. We cover Ramsgate, Broadstairs, Margate, Canterbury, Whitstable, Herne Bay, Sandwich, Dover, Folkestone and surrounding areas, with affordable local repairs for sash windows, casement windows and timber frames of all types.
Yes. In many cases, sashes can be repaired without replacing the whole window. We look at the condition of the sashes, box frame, sill and surrounding timber before recommending the most sensible option. Small areas of decay, broken cords, loose glazing bars, worn beads and damaged rails can often be repaired or replaced individually.
Where the existing window is still largely sound, repairing it is usually more affordable than fitting a complete replacement. It also helps retain the original proportions and character of traditional timber windows.
Yes. Bottom rails are one of the most common sash window repairs because they are exposed to rainwater, failed paintwork and damaged putty. Once moisture gets into the timber, rot can spread along the rail and into the lower stiles.
We can remove the damaged section and fit a new bottom rail to match the original sash as closely as possible. Where needed, we can also repair or replace lower stile sections at the same time.
Yes. We can replace bottom rails, meeting rails, top rails and localised stile sections where they have become rotten, split or structurally weak. The new timber is made to suit the size and profile of the existing sash so that the repair blends in once the window has been prepared and painted.
Where only one section is affected, we aim to retain as much sound original timber as possible. If the sash is too far gone for a sectional repair, a complete replacement sash may be the better option.
Yes. Broken or worn sash cords are a common cause of sash windows dropping, becoming difficult to open or failing to stay in position. We can fit new cords, check the pulleys and make sure the weights are operating correctly within the box frame.
If the sash is sticking as well as having broken cords, we can also look at paint build-up, swollen timber, worn beads or other issues affecting how smoothly the window moves.
Yes. Rotten window frames can often be repaired with carefully fitted timber splices or resin repairs, depending on the size and position of the damaged area. Common problem areas include lower frame corners, outer linings, jambs and the timber beneath the sash.
We remove decayed timber back to a sound section before carrying out the repair. This helps create a strong and practical result while avoiding unnecessary full frame replacement where possible.
Yes. Timber window sills are regularly affected by rot because they take the full impact of rainwater. We repair damaged sill ends, worn front edges and localised decayed sections beneath sash and casement windows.
Where a sill is too deteriorated for a dependable repair, we can fit a replacement timber sill with the correct fall and drip detail. This helps direct rainwater away from the building and protects the frame below.
Yes. We can reglaze loose, cracked or broken panes in traditional timber windows. This can include replacing damaged glass, renewing failed putty and repairing or replacing damaged timber glazing bars where needed.
Reglazing is often completed alongside other repairs such as sash rail replacement, sill repairs or general window maintenance, helping to leave the window more secure and weather-resistant.
We undercoat new timber and any exposed timber created during the repair, so no bare wood is left exposed when the work is complete. This helps protect the repaired sections while the windows are waiting to be decorated.
The windows will still need full preparation and decoration afterwards, particularly where existing paintwork remains on the surrounding areas. A decorator should allow for sanding, filling, preparation and painting across the full window for a consistent final finish.
Many smaller sash window, casement, frame and sill repairs can be assessed from photographs. Clear pictures of the affected area, a wider photo of the full window and a short description of the issue usually give us enough information to provide an initial estimate.
For larger repairs, replacement sashes or more extensive decay, we may need to arrange a visit to inspect the window properly and confirm the most suitable repair.
Yes. We regularly carry out glazing repairs to listed buildings and period homes, using traditional materials and techniques wherever appropriate to preserve the property's original character.
We carry out sash repairs across Ramsgate, Broadstairs, Margate, Canterbury, Whitstable, Herne Bay, Sandwich, Dover, Folkestone and surrounding areas throughout East Kent.Whether you need a broken sash cord replaced, a rotten bottom rail repaired, a new sill fitted or a casement window restored, we provide practical local repairs for traditional timber windows.
